EN 50174-1 : Specification and Quality Assurance
This standard comprises three parts, this being part 1. All
three parts support the specification, implementation and operation
of information technology cabling using both balanced copper
and optical fiber cabling components
These components are combined to provide cabling solutions either
in accordance with the design requirements of EN 50173 or to
meet the requirements of one or more application-specific standards
(such as EN 50098-1 or EN 50098-2).
This part is intended to be referenced in contracts between
cabling installers and their customers. However, the range
of options featured in many of the clauses make a single conformance
statement impossible. For this reason the standard should
be read carefully to ensure that the requirements of the standard
(as defined by the use of the word "shall") are
adhered to where conformance is required under the terms of
any contract.
EN 50174-2 : Installation planning and
practices inside buildings
This standard comprises three parts. All three parts support
the specification, implementation and operation of information
technology cabling using both balanced copper and optical
fiber cabling components. These components may be combined
to provide cabling solutions either in accordance with the
design requirements of EN 50173 or to meet the requirements
of one or more application-specific standards (such as EN
50098-1 or EN 50098-2).
This part contains detailed requirements and guidance relating
to the installation planning and practices inside buildings
and is intended to be used by the personnel directly involved
in the planning and installation of information technology
cabling. It shall be used during the different implementation
phases when installing information technology cabling, i.e.
during the planning phase, the design phase and installation
phase.
EN 50174-3 : Installation planning and
practices outside buildings (Draft, not available until at
least Dec 2002)
This part contains detailed requirements and guidance relating
to the installation planning and practices outside buildings
and is intended to be used by the personnel directly involved
in the planning and installation of information technology
cabling. It shall be used during the different implementation
phases when installing information technology cabling, i.e.
during the planning phase, the design phase and installation
phase. |